Parts & More

The Hide-A-Hose MD Handle Only for Stretch Hose is a replacement handle for select older Hide-A-Hose MD stretch hoses. It is designed to replace a cracked, damaged, or worn hose handle without replacing the full stretch hose assembly. The hose twists...

The Hide-A-Hose MD Central Vacuum Hose Slip Cuff is a replacement or connection cuff used to join one central vacuum hose to another hose cuff. This handy hose connector can help extend a compatible central vacuum hose setup or replace a worn slip cuff...

The Hide-A-Hose MD Tapered Cuff is a replacement hose cuff designed for basic central vacuum hoses without an on/off switch on the handle. This cuff screws onto the hose end and allows the hose to fit select inlet valves that are slightly larger than 1.5...

The Hide-A-Hose MD Central Vacuum Hose Coupler is a replacement hose repair connector used to join two compatible central vacuum hose sections together. It can be used to repair a damaged hose section or to create one hose from two pieces. This coupler...

The Hide-A-Hose MD Hose Cuff with Metal End is a replacement cuff for basic central vacuum hoses that use an all-metal inlet end. It is designed for compatible older hoses produced before 2004 with a 1-1/4 inch inside hose diameter. The metal end inserts...

The Hide-A-Hose MD Reduced Tapered Cuff is a replacement screw-on hose cuff designed for basic central vacuum hoses used with smaller 1.25 inch wall inlet valves. It is made for non-electric hoses without an on/off switch on the handle and is commonly...

The Hide-A-Hose MD Hose Cuff with Metal Ring is a replacement wall-end cuff for compatible basic central vacuum hoses. The cuff screws onto the threaded end of the hose and is designed to activate the central vacuum system when inserted into compatible...

The Hide-A-Hose MD Adapter for NuTone Square Inlets and VacuFlo 4940 is a specialty central vacuum hose adapter designed to connect compatible hoses to select non-standard wall inlet valves. This adapter fits square NuTone-style inlets and VacuFlo...

The Hide-A-Hose MD Metal Stub Tube is an adapter designed to help compatible central vacuum hoses fit older 1.25 inch diameter wall inlet valves. It is commonly used with Budd, Kenmore/Sears, and similar inlets that start suction when the inlet door is...

The Hide-A-Hose MD Neck Elbow for TurboCat is a replacement neck elbow designed for compatible TurboCat air-driven central vacuum powerheads. This part replaces the swivel neck connection where the wand attaches to the TurboCat nozzle, helping restore...

The Hide-A-Hose MD Spring Clip for Wand for TurboCat and Zoom is a small replacement clip used in the neck elbow area of compatible TurboCat-style air-driven powerheads. This part helps secure and release the wand connection on the powerhead neck...

The Hide-A-Hose MD TurboCat Belt is a replacement cogged belt for compatible TurboCat-style air-driven central vacuum powerheads. This belt transfers turbine movement to the brush roller, helping restore proper brush rotation and carpet agitation when...