Inlet Valve Extension

The Hide-A-Hose MD Inlet Valve Extension provides additional reach when a central vacuum wall inlet cannot properly connect to the mounting plate because the wall or finished surface is thicker than normal. It is especially useful after adding tile, wood paneling, wainscoting, additional drywall, or other wall coverings that increase the distance between the inlet faceplate and the mounting plate inside the wall. Each extension adds approximately 3/4 inch of depth and can be trimmed shorter when less extension is required.

Key Features:

• Extends the reach of compatible central vacuum inlet valves
• Adds approximately 3/4 inch of depth per extension
• Helps bridge gaps caused by thick walls or added wall coverings
• Ideal for tile, paneling, wainscoting, drywall, and retrofit installations
• Can be cut shorter when a full 3/4-inch extension is not required
• Multiple extensions can be stacked when additional reach is needed
• Helps maintain a proper connection between inlet valve and mounting plate
• Useful for both wall and compatible floor inlet installations
• Compatible with many standard central vacuum inlet systems
• Longer mounting screws may be required
• SKU 614

Specifications:

• Brand: Hide-A-Hose MD
• Product: Inlet Valve Extension
• SKU: 614
• Product Type: Central Vacuum Inlet Extension
• Extension Added: 3/4 in. per extension
• Adjustable: Yes, can be cut shorter
• Stackable: Yes
• Large End Inside Diameter: 1-5/8 in.
• Large End Outside Diameter: 1-7/8 in.
• Small End Inside Diameter: 1-1/2 in.
• Small End Outside Diameter: 1-5/8 in.
• Application: Central vacuum inlet installation and retrofit
• Typical Use: Thick walls, tile, paneling, wainscoting, additional drywall, and floor installations
• Longer Screws Included: No
• Quantity: 1 Extension