Fuse Plug for Electric Hose (cuff and 2-pin plug)

The Hide-A-Hose MD Fuse Plug for Electric Hose (cuff and 2-pin plug) is a replacement and conversion kit for electric central vacuum hoses. Built In Vacuum says it can be used either to convert a pigtail cord hose to a 2-pin direct-connect setup or as a replacement kit for an existing 2-pin direct-connect hose end. The kit includes the cuff, 2-pin plug, connection pieces, and instructions needed for the repair.

Key Features:

• Replacement and conversion kit for electric vacuum hoses.
• Can convert a pigtail cord hose to a 2-pin direct-connect hose end.
• Can also replace an existing broken 2-pin direct-connect assembly.
• Includes one 2-pin plug with molded-in 5 amp diode/fuse, replacing older 7 amp versions.
• Includes one male pin connection for the yellow hose wire.
• Includes one female slate connection for the white hose wire.
• Includes a tiny slat to convert older white-wire pin setups to the newer slat connection.
• Compatible with hoses that start with Series XY on the hose cuff.
• Also compatible with hoses that have a circle and a P with a squiggle stamped on the hose cuff.

Specifications:

• Brand: Hide-A-Hose / MD. The product is listed in the MD/central-vacuum parts ecosystem, and the matching part is surfaced on Built In Vacuum and MD reseller support pages.
• Product Name: Fuse Plug for Electric Hose (cuff and 2-pin plug).
• SKU / Part Number: 352CP.
• Product Type: Electric hose direct-connect cuff and plug replacement kit.
• Connection Type: 2-pin direct connect.
• Fuse/Diode: Molded-in 5 amp diode/fuse.
• Replaces: Older 7 amp versions.
• Included Parts: cuff, one 2-pin plug, one male pin connection, one female slate connection, tiny slat, instructions.
• Compatibility: Hoses with Series XY on the cuff, and hoses with a circle + P with squiggle mark.
• Polarity: White wire on I and yellow wire on II.